Grab rails, welded assemblies and sheet metal parts for US manufacturers
A contract manufacturer in Bursa, Türkiye since 2004: CNC tube bending up to Ø90 mm (3.5 in), robotic welding and presses up to 1,200 t, with painting and assembly under one roof. Drawings in inches or millimeters.
What we make
-
Grab rails and handrails
CNC-bent stainless, steel and aluminum grab rails and handles for buses, trucks, specialty vehicles and cabs — bent, drilled, welded, polished or powder coated and delivered as complete sets.
Grab rails → -
Welded assemblies
Pressed and laser-cut parts joined into sub-assemblies on robotic spot and MIG/MAG welding cells and laser welding units, then painted and assembled in the same plant.
Welded assemblies → -
Stamped and formed parts
Sheet metal parts formed and deep-drawn on 7 presses up to 1,200 t, with dies designed, built and maintained in our own tool shop.
Sheet metal forming →
Working with us from the US
- Drawings and materials
- Send drawings in inches or millimeters. We work to your material specification, whether ASTM, SAE or EN.
- Quotes
- Our engineering team reviews each request and sends the quote in about 7 business days.
- Quality
- ISO 9001:2015 certified (IQR International, QMS-014904). PPAP, 8D, SPC and MSA; parts measured by 3D blue laser scanning at 0.02 mm (0.0008 in).
- Shipping
- Ocean freight from the port of Gemlik, near our Bursa plant. Port to port to the US East Coast typically takes about 3–4 weeks, depending on carrier and route. Delivery terms are agreed per project.
- Time zones
- Our office hours, 7:30 a.m.–5:30 p.m. Türkiye time (UTC+3), overlap with the US East Coast morning until about 9:30 a.m. ET (10:30 a.m. during daylight saving time).
- Language
- Our team works in English, Turkish and German.
Capabilities in US units
| Tube bending | 5 CNC benders · up to Ø90 mm (3.5 in) diameter, 5 mm (0.20 in) wall, 6 m (19.7 ft) length · smallest bend radius 10 mm (0.39 in) |
|---|---|
| Presses | 7 presses (4 hydraulic, 3 mechanical) · largest 1,200 t (approx. 1,320 US tons) · bed up to 1600 × 2800 mm (63 × 110 in) |
| Sheet thickness | 0.5–20 mm (0.02–0.79 in) |
| Welding | 2 spot welding robots · 1 robotic MIG/MAG cell · 2 laser welding units · manual TIG |
| Finishing | Electrostatic powder coating and wet painting · polishing |
| Plant | 6,000 m² (approx. 64,600 sq ft) in Bursa, Türkiye · 100+ employees · since 2004 |
Guides for US buyers: sourcing metal parts from Türkiye (shipping, Incoterms, duties, PPAP), EN–ASTM/SAE material equivalents, the tube bending design guide and our RFQ checklist.
Questions from US buyers
Do you accept drawings in inches and US material specifications?
Yes. We quote from inch or metric drawings and work to the material specification on your drawing, whether ASTM, SAE or EN.
How long does a quote take?
About 7 business days. Send a 3D model (STEP preferred) and a 2D drawing with tolerances, the material and your annual volume through our quote form.
How are parts shipped from Türkiye to the US?
By ocean freight from the port of Gemlik, near our plant in Bursa. Port to port to the US East Coast typically takes about 3–4 weeks, depending on carrier and route. Delivery terms are agreed per project.
Are steel parts from Türkiye subject to US import duties?
Steel and aluminum parts imported into the US can be subject to additional duties under Section 232, depending on their tariff (HTS) classification, and the rates have changed several times since 2025. Please confirm the current rate for your part with your customs broker; we provide the material, weight and specification data the broker needs.
Which quality certifications do you hold?
ISO 9001:2015, certified by IQR International (certificate QMS-014904). We run PPAP, 8D, SPC and MSA, and held IATF 16949 certification from 2018 to 2021.
Who are your current customers?
Since 2004 we have supplied manufacturers including Ford Otosan, Karsan, CNH Industrial, AGCO and Türk Traktör, and we export to 10 countries, mainly France, Germany, Brazil, Finland and Italy.
Request a quote for your project
Upload your drawing (STEP, IGES, PDF, DWG, DXF) and it goes straight to our engineering team.